Medical Bed Gas Spring

Medical bed gas spring is a form anywhere locking gas spring . Lockable gas spring piston rod end, a plunger , push the plunger inside the valve open so that the flow of gas or oil , the lockable gas springs can be as free as the compressed gas spring stretch ; when it reaches the desired position when , the release plunger inside the valve is closed , the rod can be locked. Lockable gas springs locked using its locking force can carry larger loads than if the load on the locking force , the lock function failure . This function is to facilitate medical beds , which means that the most important patient mobility is developed using a gas spring . Gas spring is a way to play a supportive , cushioning, brake , height adjustment and angle adjustment functions such as industrial parts . It consists of the following components: cylinder , piston , piston seal guide sleeve , filler ( inert gas or gas mixture ) , cylinder and cylinder control elements outside the control element ( refer controllable gas spring ) , and other joints. The working principle of the gas spring in the sealed pressure cylinder is filled with an inert gas or gas mixture to a pressure above atmospheric pressure inside the chamber several times or several times, using a piston rod cross-sectional area smaller than the cross-sectional area to to achieve the movement of the piston rod produced by the pressure difference。

Application of gas spring

The product mainly applies in the shutter of the equipment such as the car, ship and Gas spring medical equipment application

. Dividing anatomically as follows:

　　（1）Compressional and zero damping type；

　　（2）Compressional and zero damping type, popping 30mm-50mm buffering damping；

　　（3）Compressional and damping, popping zero damping type；

　　（4）Compressional and damping, popping damping type, the users has the optional choice according to his needs. Our products are all produced according to the Germanic technique standard, reliable, non-steam and gas-leaking. What’s more , they have the advantages of steady projectile velocity, long lifespan and wide use.

Two stick and balance gas spring

It is the newest product we have produced, mainly using in the openness and closeness of the top on the cars, ships and planes. In the middle of the gas spring, it is barrel; to both ends, it is cylinder rods. It can compress with both rods at the same time, because it has good damping strength but no noise. It has been the best product replacing the shutter of the machines now.